Filter
Top Products
25
Basic connections and settings
This section explains basic connections and data flow for the FA-101.
Refer to the block diagram printed on the front cover of the manual as you read this section.
* Before making connections to other equipment, turn down the volume of all your equipment and turn off the power to
avoid causing malfunctions or damaging your speakers.
* When connection cables with resistors are used, the volume level of equipment connected to the inputs (Input jacks) may
be low. If this happens, use connection cables that do not contain resistors, such as those from the Roland PCS series.
Use a FireWire (IEEE 1394) cable to connect the FA-101 to your computer. MIDI data and audio data are
transferred in both directions via the FireWire (IEEE 1394) cable.
By connecting headphones or monitor speakers as shown in the diagram below, you can monitor the playback
from your software or the sound from an instrument or audio device connected to the FA-101.
fig.basic
Basic connections
FireWire cable
Computer
Amplified speakers
Headphones
IEEE1394 connector (FireWire connector,
iLink connector, DV connector)
FireWire (IEEE1394) connector
FA-101_e.book 25 ページ ２００５年１１月２４日 木曜日 午後１時２５分