Filter
Top Products
Combi Page Select 0–1: Program T01–08, 0–2: Program T09–16
47
Combination mode
Combi Page Select
For details on how to select each page, refer to the “M3
operation guide.”
COMBI P0: Play
In this page you can select and play combinations.
In Combination mode, you can use four RADIAS programs.
0–1: Program T01–08,
0–2: Program T09–16
Here you can specify the program, Play/Mute, and Solo
On/off settings for timbres 1–8 and 9–16.
For details on selecting combinations, selecting programs,
the editable parameters, and the display, refer to the M3
operation guide and parameter guide.
R (EXB-RADIAS)
Timbres for which a RADIAS program can be used are
indicated by “ ”. If you select a program from bank INT-
F etc. for a timbre indicated by “ ”, a RADIAS program
played by the EXB-RADIAS will sound.
Use the ENABLE RADIAS setting to specify the timbres for
which a RADIAS program can be used. (☞ “Enable
RADIAS” on page 50)
Note: You can turn on Enable RADIAS for up to four
timbres. Even if you select a RADIAS program for a timbre
whose ENABLE RADIAS setting is turned off, it will not
sound.
0–3: Mixer T01–08,
0–4: Mixer T09–16
Here you can adjust the volume and pan settings for
Timbres 1–16.
For details on the available parameters and menu
commands, please see “0–3: Mixer T01–08, 0–4: Mixer T09–
16” on page 123 of the M3 parameter guide.
Page Main content
PLAY
P0: Play
Select and play combinations.
Program selection for each timbre.
Pan and volume settings etc. for each timbre.
Simple KARMA editing.
Audio input settings and resampling
settings.
Editing from the control surface.
(☞M3 PG p.120)
EDIT
P1: DT/X–Y/Ctrls
Drum track settings.
X–Y control settings.
SW1, 2, and slider function settings.
Pad note and velocity settings
(☞M3 PG p.138)
P2: EQ/Option
EQ settings for each timbre. (☞M3 PG p.147)
Settings for the EXB-RADIAS option. (☞p.50)
P3: Timbre Param
Various parameter settings for each timbre
(MIDI channel, OSC selection, Pitch setting,
etc.) (☞M3 PG p.149)
P4: Zone/Delay
Key split and layer settings.
(Key zone and velocity zone)
Time delay from note-on to beginning of
sound. (☞M3 PG p.153)
P5–1:
MIDI Filter 1
MIDI transmit/receive filter 1 settings. (☞M3
PG p.157)
P5–2:
MIDI Filter 2
MIDI transmit/receive filter 2 settings. (☞M3
PG p.160)
KARMA
P7–1: KARMA1– GE Overall KARMA settings. (☞M3 PG p.161)
P7–2: KARMA2–
Module
Settings for each KARMA module. (☞M3 PG
p.169)
P7–3: KARMA3–
GE RTP
KARMA GE realtime parameter settings.
(☞M3 PG p.171)
P7–4: KARMA4–
Perf
KARMA performance parameter settings.
(☞M3 PG p.173)
EFFECT
P8–1: IFX Route1/
1–5
Oscillator output bus and master effect send
level settings.
Insert effect routing, selection, and settings.
(☞M3 PG p.177)
P8–2: IFX Route2
Bus settings for oscillator output.
Common FX LFO 1, 2 settings (☞M3 PG
p.181)
P9: MFX/TFX
Master effect routing, selection, and settings.
Total effect selection and settings. (☞M3 PG
p.183)
R (EXB-RADIAS)