Filter
Top Products
29
padKONTROL Owner’s Manual
3 To exit Native mode, make the appropriate settings in
your connected software that supports Native mode, or
hold down the padKONTROL’s [SCENE] key and
[MESSAGE/EXIT] key, and press the [SETTING/
ENTER] key.
The padKONTROL will return to Play mode.
Normally you should exit Native mode by using the menu of
your connected software. If you are unable to exit Native mode
from the menu of your software because a cable has been
disconnected or for some other reason, use the keys of the
padKONTROL to exit Native mode.
For details about how to enter and exit Native mode, about
the messages that appear in the main display when in Native
mode, and about the operations in Native mode, please refer
to the owner’s manual for your software that supports Native
mode.
Troubleshooting
■ Power does not turn on
• Is the power switch set to the correct position? (p.12)
• Could the padKONTROL be connected to your
computer via a hub?
■ Software does not respond
• Is the USB cable connected correctly?
• Has the padKONTROL been recognized by the
connected computer?
If you’re using Windows XP, go to Control Panel “Sound
and Audio Devices Properties” and check the Hardware
settings.
If you’re using Mac OS X, go to Macintosh HD ➔
Application folder ➔ Utility folder ➔ ”Audio MIDI
Settings,” and in the “MIDI Devices” tab page, check
whether the padKONTROL has been recognized.
Depending on the hardware setup of your computer, it may
not be possible for the padKONTROL to be recognized via a
USB connection.
• Check the padKONTROL assignments and the USB-
MIDI Port assignments.
• It may be that the connected device or software does
not support the function you’re attempting to use.
Refer to the owner’s manual of the connected device
or software, and make sure that the function is
supported.
■ Trigger pad velocity is not detected
• Check the velocity setting. (p.20)
■ Sound does not stop
• If a note number is assigned to a trigger pad and the
trigger pad is set to Toggle operation, it may be that
the corresponding Note-off message was not
transmitted. If this occurs, use the Message function to
execute [2] ALL NOTE OFF (p.17) or [1] PANIC (p.17).
Specifications
■ Controllers
Trigger pads ✕ 16: velocity-sensitive
X-Y pad
Assignable knobs ✕ 2
Pedal
■ Display
LED
■ Memory
User scene memories: 16
Preloaded scene templates: 30
■ Connectors
Pedal jack
MIDI IN/OUT connectors
USB connector
Power supply jack (DC9V)
■ Power supply
DC9V, AC adapter (optional)
USB bus power (when using the USB connector)
■ Dimensions (W ✕ H ✕ D)
314.2 ✕ 55.1 ✕ 233.6 mm / 12.4 ✕ 2.2 ✕ 9.2 inches
(including protrusions)
■ Weight
960 g / 2.1 lbs.
■ Current consumption
When using USB bus power: 150 mA (MAX 180 mA)
When using DC9V adapter: 150 mA (MAX 180 mA)
■ Included items
• USB cable
• CD-ROM (containing padKONTROL Editor/Librarian
software etc.)
• Owner’s manual
• Software license agreement
■
Operating requirements for connection to a computer
Macintosh
Operating system: Mac OS X 10.2 or later
Computer: Apple Macintosh computer with a USB
port, satisfying the operating
requirements of Mac OS X
Windows
Operating system: Microsoft Windows XP Home Edition/
Professional
Computer: Computer with a USB port, satisfying
the operating requirements of
Windows XP (USB chipset made by
Intel Corporation is recommended)
■ Options
AC adapter
Pedal switch PS-1
Appearance and specifications of the product are subject to
change without notice. (Current as of July 2005)