Filter
Top Products
30
List of key operations
Play mode (performing)
Recall a scene Hold down the [SCENE] key and press a trigger pad [1]...[16]
Use the Roll function Press the [ROLL] key
Use the Flam function Press the [FLAM] key
Use the Hold function Press the [HOLD] key
Transmit a program change Hold down the [PROG CHANGE/WRITE/ALL PAD] key and turn the encoder
Transmit a message Hold down the [MESSAGE/EXIT] key and press a trigger pad [1]...[8]
Fix the velocity value Press the [FIXED VELOCITY/PRELOAD] key
Setting mode (editing)
Enter Setting mode Press the [SETTING/ENTER] key
Return from Setting mode to Play mode
Press the [SETTING/ENTER] key
Cancel while editing Press the [MESSAGE/EXIT] key
Save a scene
Hold down the [SCENE] key and press the [PROG CHANGE/WRITE/ALL PAD] key
Setting mode
KeyTrigger Pad Pedal X-Y Pad Knob1/2 Flam Roll
[NOTE/CC#/LEFT] Note#[C-1...G9] / Note#[C-1...G9] / Message Type Message Type Interval Left Speed Left
CC#[0...127] CC#[0...127] [No Assign/Pitch Bend
[No Assign/Pitch Bend
[0...255] [40...240]
/After Touch/CC#] /After Touch/CC#]
[MIDI CH/RIGHT] MIDI CH MIDI CH Interval Right Interval Right
[Disable/1...16] [Disable/1...16] [0...255] [40...240]
[SW TYPE/POLARITY] Switch Type Switch Type Polarity Polarity
[Momentary/Toggle] [Momentary/Toggle] [Normal/Reverse] [Normal/Reverse]
[REL . VAL./LOWER] Release Value[0...127] Release Value[0...127] Release Value Volume Lower Expression Lower
(only if cc is assigned) (only if cc is assigned) [0...127/-128...127] [1...127] [1...127]
[VELOCITY/UPPER] Velocity Curve(Note) Velocity Curve(Note) Volume Upper Expression Upper
On Value[0...127] (cc) On Value[0...127] (cc) [1...127] [1...127]
[PORT] USB-MIDI Port USB-MIDI Port
[PORT A/PORT B] [PORT A/PORT B]