Filter
Top Products
9
padKONTROL Owner’s Manual
2 From the taskbar, choose [Start] ➔ [All Programs] ➔
[KORG] ➔ [KORG USB-MIDI Driver Tools] ➔ [Install
KORG USB-MIDI Device] to start the setup utility.
The list in the upper part of the dialog box will show the
KORG USB-MIDI device that are currently connected to
the PC. The lower part of the dialog box will show the
version information for the KORG USB-MIDI Driver you
are about to install.
In the list, select the KORG USB-MIDI device that is
currently connected to the PC, and click [Install].
Installation of the device will begin.
3 During the installation, you may see a dialog box
warning you about digital signatures. Please click
[Continue] to proceed.
4 When driver installation is completed, click [Finish] to
complete the installation.
If you are asked to restart Windows, choose [Yes] to
restart.
■ Allowing driver installation without a digital
signature
If your computer is set so that drivers that are not digitally
signed cannot be installed, you will not be able to install the
KORG USB-MIDI driver. Proceed as follows to change the
setting so that you will be able to install the driver.
1 From the task bar, click [Start] ➔ [Control Panel] to
open the Control Panel.
In the Control Panel, start up [System], and click the
[Hardware] tab.
Click [Driver Signing].
2 If “What action do you want Windows to take?” is set to
“Block,” you won’t be able to install the driver. Choose
[Ignore] or [Warn], and click [OK].
If necessary, restore this setting to its original state
when you’ve finished installing the driver.