Filter
Top Products
33
Owner's Manual
Owner's Manual
Close All Windows
• This does just what it says, it closes all open
windows in the display.
Setup (Ctrl+1)
The Setup window has four sub-windows: Gen-
eral, Macros, Mix Options, and MIDI, all selectable
with the buttons at the top of the Setup window.
General
The General Setup window provides access to the
following functions:
•
Date and Time allows you to set the date and
time for the Digital X Bus. This is important to
keep your fi les in the correct chronological order.
• Touch Calibration initiates a routine to calibrate
the touchscreens by having you touch a dot in
the corners of both touchscreens. You may need
to recalibrate the touchscreens from time to
time, especially if it seems that the touchscreen
isn’t responding as quickly as it should.
• Language selection is a drop-down box used to
select your preferred language. English is the
default setting.
• Smart Save is a function that automatically
saves your sessions every fi ve minutes. Check
the “Create New Files” box to save the session
as a new session without overwriting the previ-
ously saved version. Check “Load Last Session
at Power-up” to automatically open the last ses-
sion you were working on when you boot up the
Digital X Bus, rather than the default Startup
session.
Macros
The Macros window allows you to assign virtu-
ally any function to the Macro buttons in the Screen
Sets section located above the Transport section on
the control surface. This gives you quick and easy
access to windows and frequently repeated actions.
Mix Options
Surround Mode
• This pull-down list provides access to the vari-
ous surround sound modes available on the
Digital X Bus.