Filter
Top Products
83
Menu descriptions
File menu
Creation of a new list
This clears the current transmission list and creates a new
one (refer to page 86). The same operation can be
performed with the operation button .
Open image
This opens an image and adds the title data at the end of
the transmission list. The same operation can be performed
with the operation button .
Open List
This clears the current transmission list and opens a
previously saved transmission list. The same operation can
be performed with the operation button .
Save List
This overwrites and saves the current transmission list.
If the current transmission list does not have a name, the
operation becomes the same as with “Save List as...”
The same operation can be performed with the operation
button .
Save List as...
This saves the current transmission list with a new name.
Preview
This opens the image display screen and displays the image
of the title selected by the cursor. The same operation can
be performed by double-clicking the ICON column of the
data display and selecting “Preview” from the pop-up menu.
Property
This opens the Properties setting screen for the title
selected by the cursor.
The same operation can be performed by double-clicking
the column IN, TYPE, OUT, NAME of the title data display
or by right-clicking the title data and selecting “Property”
from the displayed menu.
Read flash memory
This reads the data (SETUP menu settings, operation panel
settings, etc.) in the flash memory of the AG-MX70, and
saves it in files.
Select this menu item after turning on the power while
holding down the “0” key and “5” key on the operation panel
of the AG-MX70 and setting the AG-MX70 to the flash
memory backup mode. A dialog box now appears so input
the file name and click the “OK” button to save the flash
memory data.
Write Flash memory
This writes the data of the saved file into the flash memory
of the AG-MX70.
Select this menu item after turning on the power while
holding down the “0” key and “5” key on the operation panel
of the AG-MX70 and setting the AG-MX70 to the flash
memory backup mode. A dialog box now appears so select
the file and click the “OK” button to write the file data. When
this operation is performed, all the data in the flash memory
of the AG-MX70 is replaced.
Exit
This shuts down the program.
Edit menu
Undo
This undoes data additions, deletions and other operations.
Up to 16 steps can be undone.
The same operation can be performed by pressing “Ctrl” +
“Z.”
Redo
This cancels the contents of the Undo.
The same operation can be performed by pressing “Ctrl” +
“Y.”
Cut
This deletes the selected title from the transmission list and
saves it to the clipboard. The saved title can be added to
the transmission list via the “Paste” menu. Only the title cut
last will be saved.
The same operation also can be performed by “Ctrl” + “X” or
by right-clicking the title data display column and selecting
“Cut” from the pop-up menu.
Copy
This copies the selected title to the clipboard.
The saved title can be added to the transmission list via the
“Paste” menu. Only the title cut last will be saved.
The same operation can be performed with “Ctrl” + “C” or by
right-clicking the title data display column and selecting
“Copy” from the pop-up menu.
Paste
This adds the title saved on the clipboard to the
transmission list.
The same operation can be performed with “Ctrl” + “V” or by
right-clicking the title data display column and selecting
“Paste” from the pop-up menu.