Filter
Top Products
93
Other operations
Setting the operating environment
The operation settings for this application can be set on the
operation environment screen.
1) Select “Operating environment” from the Tools menu
of the main window.
The Environment screen will be displayed.
2) Set the individual items and click the “OK” button to
change the settings.
Boot and shutdown
The operation at the time of boot and shutdown of this
application is set.
≥ Resume mode
When this is checked, the transmission list which
was open when the application was shut down the
last time will be opened at startup and the status
effective at the time the application was shut down
the last time will be re-established.
When this is not checked, a new transmission list
will be opened at startup.
≥ Confirmation mode
When this is checked, the confirmation screen will
be displayed when the application is shut down.
1
Memory management
The operation when the AG-MX70 is connected to the
PC is set.
When “Memory clear when re-connect” is checked, all
Title and IntVideo data will be cleared when the AG-
MX70 is connected.
Check “Clear the protected data” when data with the
Protect setting is also to be cleared.
2
File Management
When adding an image that has once been used as title
data to the transmission list, select whether the previous
property settings are to be used.
The previous properties can be cleared using the “Clear
previous property” button.
≥ Always Use previous property
When the previous properties are still available, the
previous property settings are used again and
again.
≥ Confirm using previous property
When the previous properties are still available, a
confirmation screen for using or canceling the
previous properties appears.
If the previous properties are not going to be used,
alternative properties are handled as new data.
≥ Not use the previous property
The data will always be handled as new data.
3
1
3
4
2
Target folder
The folder to be opened first when opening or saving
data is set. Enter the folder directly or click the “Browse”
button and select from the displayed folder selection
screen.
≥ List folder
The folder to be opened first for opening or saving a
transmission list is set.
The default folder is the ListData folder created
under the folder in which this application has been
installed.
≥ Title folder
The folder to be opened first when opening or
saving Title data is set.
The default folder is the TitleData folder created
under the folder in which this application has been
installed.
≥ IntVideo folder
The folder to be opened first when opening or
saving IntVideo data is set.
The default folder is the IntVideoData folder created
under the folder in which this application has been
installed.
4