Panasonic AG-MX70P Musical Instrument User Manual


 
88
Automatic transmission and playback of Title data
The data from the cursor position to the end of the
transmission list can be transmitted automatically and DSK
playback can be performed automatically.
Select Operation > Autoload from the menu of the main
window.
Manual transmission and playback of Title
data
Data registered in the transmission list can be transmitted to
the AG-MX70 using the following procedure.
1) Move the cursor to the data to be transmitted and left
click on the data.
The yellow frame cursor moves to the selected data.
2) Select Operation > Load title from the menu of
the main window.
The data is transmitted to the AG-MX70.
<Notes>
The time required for the transmission differs according to
the image size and the number of images.
Transmission is not possible when the image memory of
the AG-MX70 does not have the required free space.
Clear any data that is not required from the image
memory (refer to Clearing Title data) and repeat the
transmission operation.
Images cannot be transmitted while the Loading...
display appears on the LCD screen immediately after the
AG-MX70s power has been turned on or immediately
after changes have been made to the image memory
settings.
While transmission is in progress, the LCD display of the
AG-MX70 shuts down.
DSK playback of the transmitted data is possible using the
following procedure.
1) Move the cursor to the data for DSK playback and left
click on the data.
The yellow frame cursor moves to the selected data.
2) Select Operation > Play from the menu of the
main window.
DSK playback is performed for the data.
<Note>
In order to perform DSK playback for the data, it is
necessary to set Key and Fill to Title using the DSK/Fade
item on the DSK Fade menu of the AG-MX70. For details,
refer to page 46.
Title data operations
1
2
5
3
4
1 The DSK status is displayed here.
2 The transmission status is displayed here.
3 This executes DSK ON/OFF.
4 This stops automatic loading.
5 When a check is entered, a return is made to the
initial data and playback continues after the last
data on the transmission list has been played
back.
<Notes>
Any data that has not been transmitted will be transmitted
automatically. Transmission also will be executed during
playback of other data.
If the data transmission has not been completed by the
time the DSK playback stage is reached, standby status
will be maintained until it is completed.
After DSK playback, data without the Protect setting will
be cleared from the memory.
Clearing Title data
The data written to the image memory of the AG-MX70 will
be cleared only by a clearing operation or when the power
supply of the AG-MX70 is switched off. When space is
required for transmission of new data, delete any data that
is not required. The clearing operation is performed using
the following procedure.
1) Move the cursor to the data to be cleared and left
click on the data.
The yellow frame cursor moves to the selected data.
2) Select Operation > Clear the selected title from
the menu of the main window.
The data is cleared.
<Notes>
When Operation > Clear all title is selected from the menu
of the main window, all transmitted Title data will be cleared.
Data for which Protect has been set will not be cleared by
this operation. Clearing of data for which Protect has
been set must be done from the memory status screen.
(Refer to page 90.)