Filter
Top Products
151
SYSTEM Chapter 8 Parameter Guide
Chapter 8
OUTPUT
* The parameters enabled (MAIN OUT, MAIN LEVEL, SUB OUT,
SUB LEVEL, D OUT, D OUT LEVEL) change according to the
OUTPUT MODE settings.
When they are disabled, the value < > is given.
Parameter/
Range
Explanation
OUTPUT MODE
SYSTEM
The values set in the SYSTEM parameters
MAIN OUT, MAIN LEVEL, SUB OUT, SUB
LEVEL, D OUT, and D OUT LEVEL are en-
abled.
PATCH The values set in MAIN OUT, MAIN LEV-
EL, SUB OUT, SUB LEVEL, D OUT, D OUT
LEVEL for each patch are enabled.
MAIN OUT
This switches the signals output to MAIN OUT.
CH A This outputs Channel A.
The mixer’s MIX SW, PAN, LEVEL, and A/
B BAL are also reflected here.
CH B This outputs Channel B.
The mixer’s MIX SW, PAN, LEVEL, and A/
B BAL are also reflected here.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
BASS DIRECT This outputs only the bass direct sound
(normal pickup sound).
MAIN LEVEL
0–200
Adjusts the level to MAIN LEVEL.
SUB OUT
This switches the signals output to SUB OUT.
CH A This outputs Channel A.
The mixer’s MIX SW, PAN, LEVEL, and A/
B BAL are also reflected here.
CH B This outputs Channel B.
The mixer’s MIX SW, PAN, LEVEL, and A/
B BAL are also reflected here.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
BASS DIRECT This outputs only the bass direct sound
(normal pickup sound).
SUB LEVEL
0–200
Adjusts the level to SUB OUT LEVEL.
Parameter/
Range
Explanation
D OUT (Digital Out)
This switches the signals output from DIGITAL OUT.
COSM BASS A This outputs the sounds from COSM BASS
A.
COSM BASS B This outputs the sounds from COSM BASS
B.
NORMAL PU This outputs the sounds from the normal
pickup.
CH A This outputs Channel A.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
CH B This outputs Channel B.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
MAIN OUT This outputs the same signals as those from
MAIN OUT.
SUB OUT This outputs the same signals as those from
SUB OUT.
D OUT LEVEL (Digital Out Level)
0–200
Adjusts the level to DIGITAL OUT.
VB-99_e.book 151 ページ ２００８年８月１８日 月曜日 午後１時１０分