Roland LX-10 Electronic Keyboard User Manual


 
20
Before You Play
You can place music books or sheet music on the top edge of the
opened lid.
Tips for Placing Music
Insert the sheet music into the groove on the top edge of the
lid.
Crease sheet music so that it will stay open.
If this does not work, use paper clips to secure it.
If the sheet music is thin, attach it to a clipboard before
placing it on the music Rest.
941
Once you’ve got everything connected properly, you
can turn on the power using the following procedure. If
you fail to perform these steps in the correct order, you
risk causing a malfunction or damaging your speakers.
Turning the Power On
1.
Turn the [Volume] knob all the way toward
the left to minimize the volume.
fig.VolumeMin-e.eps
2.
Press the [Power] switch.
fig.PowerOn.eps
The power will turn on. The [Piano] button will light.
After a brief interval, you’ll be able to produce sounds by
playing the keyboard.
942
Due to a circuitry protection feature, this unit requires a
few moments after power is turned on before it is
ready for normal operation.
3.
Use the [Volume] knob to adjust the volume
(p. 21).
Using the Music Rest
Turning the Power On/Off
NOTE
ON
Lower
position
NOTE
LX-10_e.book 20 ページ 2008年9月22日 月曜日 午前10時51分