Filter
Top Products
79
Various Settings
In “Function mode” you can make various settings for performance and recording.
fig.Panel-Function-e.eps
1.
Hold down the [Effects] button and press the
[3D] button.
A screen like the following appears, and you’ll be in
Function mode.
fig.FuncMenu-d.eps
The [Effects] button, [3D] button, and [ ] button will
blink, and the [
▲
] button, [
▼
] button, and [Piano Designer]
button will light.
2.
Use the [
▲
] [
▼
] buttons to select the setting
that you want to change.
3.
Press the [ ] button to enter the setting
screen.
4.
Use the [-] [+] buttons to change the setting.
5.
Press the [Piano Designer] button to return
to the previous screen.
If you want to make other settings, return to step 2 and
select the setting you want to change.
6.
Press the [Piano Designer] button to exit
Function mode.
The indicators on buttons will return to their original state.
The settings you change will return to their original
state when you turn off the power. If you want your
changes to be retained even after the power has been
turned off, carry out the Memory Backup procedure (p.
89) to save the settings.
Settings You Can Change
Basic Operation in Function Mode
Function
Page
Master Tuning
p. 80
Equalizer
p. 81
Part Mute
p. 82
Accomp Track
p. 82
Play Mode
p. 82
CD/Audio Type
p. 83
CD/Audio Sync
p. 83
Metronome Sound
p. 83
Metronome Pattern
p. 83
Countdown
p. 84
Countdown Sound
p. 84
Countdown Part
p. 84
Transpose Mode
p. 84
Octave Shift
p. 84
Fix Velocity
p. 84
Damper Pedal Part
p. 85
Center Pedal Part
p. 85
Center Pedal Func
p. 85
NOTE
LX-10_e.book 79 ページ ２００８年９月２２日 月曜日 午前１０時５１分