Filter
Top Products
36
Performing
In addition to reverb, you can apply a variety of effects to the LX-10’s sounds.
These are referred to as “effects.” With the factory settings, an effect suitable for each tone is
selected.
Effects may not be applied with some of sounds.
fig.Panel-Effects-e.eps
1.
Press the [Effects] button so it’s lit.
Try fingering the keyboard.
The effect is applied to the currently selected tone.
Some tones initially have effect applied. Selecting such a tone makes the [Effects] button light up
automatically.
Effects cannot be applied to audio data or a music CD.
Turning Off the Effects
1.
Press the [Effects] button so its light is turned off.
Here’s how to edit the settings of the effect.
1.
Hold down the [Effects] button and press the [-] [+] buttons.
The screen will show the effect parameters and their values.
fig.d-EffectDepth.eps
The most suitable type of effect is assigned for each tone.
Depending on settings such as 3D Sound Control, the effect may not be applied in some cases.
Adding a Variety Effects to the Sound (Effects)
Editing the Effect Settings
NOTE
NOTE
NOTE
LX-10_e.book 36 ページ ２００８年９月２２日 月曜日 午前１０時５１分