Filter
Top Products
63
Recording
The LX-10’s recorder has three track buttons.
You can record the performance of each hand separately to different track buttons (for
example, the left-hand performance to the [Left] button and the right-hand performance to
the [Right] button), or you can re-record just a specific track of a previously recorded
performance.
fig.Panel-RecTrack-e.eps
Settings for Recording
1.
Press the [Song] button so it’s lit.
2.
Press the [-] button a number of times, until “New Song” appears in the
display.
Recording Your Performance Separately for Each Hand
How the track buttons correspond to the recorded performances
The recorded performances are assigned to the track buttons as follows.
● Twin Piano (p. 40), Split performance (p. 45)
●
Normal performance (the entire keyboard plays a single tone), Dual play
• When you record with just one recording track specified
The performance will be recorded on the specified track.
• When you record with multiple recording tracks specified
Recording will take place in this order of priority: [Right] button → [Left] button →
[Accomp] button.
Track button
Recorded performance
Twin Piano Split play
[Right] button Right area Right-hand tone
[Left] button Left area Left-hand tone
LX-10_e.book 63 ページ ２００８年９月２２日 月曜日 午前１０時５１分