Filter
Top Products
34
Performing
You can add liveliness to the sound to give it superb clarity and distinctness.
fig.Panel-Dynamics-e.eps
1.
Hold down the [3D] button and press the [Reverb] button.
A screen appears, allowing you to select the type of Dynamics Sound Control.
fig.d-Dynamics.eps
2.
Use the [-] [+] buttons to select the desired sound control setting.
fig.d-Dynamics2.eps
3.
Press the [3D] button or the [Reverb] button.
You will return to the normal screen.
You can use the Memory Backup function to store this setting in internal memory (p. 89).
For some sounds, you may hear distortion. If so, lower the master gain (p. 88).
Dynamics Sound Control does not affect the sound from the Input jack or the sound of external
devices connected to the MIDI Out connector.
Adding Liveliness to the Sound (Dynamics Sound Control)
Indicate
Description
Off
Dynamics sound control is turned off.
Sharp
Creates a sound with boosted bass and treble.
Clear
Produces a sound with chords in the low registers that are clear and distinct.
Power
Creates a sound with boosted bass.
NOTE
NOTE
LX-10_e.book 34 ページ ２００８年９月２２日 月曜日 午前１０時５１分