Filter
Top Products
35
Performing
You can apply a reverb effect to the notes you play on the keyboard. With the reverb effect,
you obtain a pleasant reverberation, making it sound as if you were performing in a concert
hall or similar space.
fig.Panel-Reverb-e.eps
1.
Press the [Reverb] button so it’s lit.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
Reverb cannot be applied to audio data or a music CD.
Turning Off the Reverb Effect
1.
Press the [Reverb] button so its light is turned off.
Reverb will not be applied if Twin Piano is turned on with Twin Piano Mode “2” selected.
You can select from ten levels of depth for the reverb effect.
1.
Hold down the [Reverb] button and press the [-] [+] buttons.
The depth for the reverb effect appears in the display.
fig.d-ReverbDepth.eps
You can use the Memory Backup function to store this setting in internal memory (p. 89).
You cannot make separate reverb effect depth settings for each individual tone.
The effect will be applied with the same depth to all tones.
This will not change the reverb depth for the song that is playing back.
Adding Reverberation to Sounds (Reverb Effect)
Changing the Depth of Reverb Effect
NOTE
NOTE
NOTE
NOTE
LX-10_e.book 35 ページ ２００８年９月２２日 月曜日 午前１０時５１分