Filter
Top Products
27
Listening to Demo Songs
Here’s how you can listen to the differences in various sounds created by the Piano Designer
function (p. 29).
1.
Hold down the [Key Touch] button and press the [File] button.
The indicators for the Tone, [Twin Piano], and [Piano Designer] buttons flash.
The following appears in the display.
fig.d-Demo.eps
You can’t play back the demo songs if your recorded performance has not been saved. Either press
the [ ] button to erase your performance (p. 26), or press [ ] button and save your recorded
performance (p. 73).
2.
Press the [Piano Designer] button.
Several of the tone buttons at the left and the [Piano Designer] button will flash.
The piano designer demo screen appears.
fig.d-DemoPnoDsgn1.eps
3.
Use the [
▲
] [
▼
] buttons to select the demo you want to hear.
4.
Press the flashing tone button.
The demo corresponding to the button you pressed will play.
fig.d-DemoPnoDsgn2.eps
By repeating steps 3 and 4, you can listen to other demos.
5.
Press the [Key Touch] button or the [File] button to exit Demo mode.
The indicators return to their previous state.
Listening to Piano Designer Demo Songs
NOTE
LX-10_e.book 27 ページ ２００８年９月２２日 月曜日 午前１０時５１分