Filter
Top Products
33
Performing
The LX-10 provides a “3D Sound Control” function, which creates the sense of spatial depth
that you experience when playing a grand piano. This function adds the natural resonance
and spaciousness that are characteristic of an acoustic piano.
fig.Panel-3D-e.eps
1.
Press the [3D] button so it’s lit.
The 3D Sound Control function will be turned on, and the sound will have more spatial depth.
2.
While holding down the [3D] button, use the [-] [+] buttons to adjust the
spatial depth of the sound.
You can adjust the spatial depth over four levels.
Increasing the value will increase the spatial depth of the sound.
fig.d-3DType.eps
You can use the Memory Backup function to store this setting in internal memory (p. 89).
You can change the way in which the 3D Sound Control function is applied (p. 88).
3D Sound Control cannot be applied to audio data or a music CD.
3D Sound Control does not affect the sound from the Input jack or the sound of external devices
connected to the MIDI Out connector.
If the Piano Designer screen is displayed, 3D Sound Control will be turned off.
When you turn Twin Piano on, 3D Sound Control will be turned off.
If you use the Playback Transpose function (p. 58) or the Center Cancel function (p. 59) when a music
CD song or an audio file is selected, 3D Sound Control will be turned off.
Turning off 3D Sound Control
1.
Press the [3D] button so its light is turned off.
Adding Spatial Depth to the Sound (3D Sound Control)
NOTE
NOTE
NOTE
NOTE
NOTE
LX-10_e.book 33 ページ ２００８年９月２２日 月曜日 午前１０時５１分