Filter
Top Products
105
Multi-Effects List
Effects
40: MODULATION DELAY
(MFX2 only)
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
fig.MFX40a
When Feedback Mode is CROSS:
fig.MFX40b
41: TRIPLE TAP DELAY
(MFX2 only)
Produces three delay sounds; center, left and right.
fig.MFX41
42: QUADRUPLE TAP DELAY
(MFX2 only)
This effect has four delays.
fig.MFX42a
fig.MFX42b
Stereo location of each delay
Parameter
Value Description
Feedback
Mode
NORMAL,
CROSS
Selects the way in which delay
sound is fed back into the effect (See
the figures above.)
Delay Left 0–2000 ms,
note
Adjusts the time until the delay
sound is heard.
Delay Right
Feedback -98– +98 % Adjusts the amount of the delay
sound that’s fed back into the effect.
Negative (-) settings invert the
phase.
HF Damp 200–8000
Hz, BY-
PASS
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don’t want to filter
out any high frequencies, set this
parameter to BYPASS.
Rate 0.05–10.00
Hz
Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0-180 deg Spatial spread of the sound
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance # D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
Parameter
Value Description
Delay Left/
Right/Center
0–4000 ms,
note
Adjusts the time until the delay
sound is heard.
Feedback
#1
-98– +98 %
Adjusts the amount of the delay
sound that’s fed back into the effect.
Negative (-) settings invert the phase.
HF Damp 200–8000
Hz, BY-
PASS
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Left/Right/
Center Level
0–127
Volume of each delay
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance #2 D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
Parameter
Value Description
Delay 1–4
0–4000 ms,
note
Adjusts the time until the delay
sound is heard.
Level 1–4 0–127 Volume of each delay
Feedback
#1
-98– +98 %
Adjusts the amount of the delay
sound that’s fed back into the effect.
Negative (-) settings invert the phase.
HF Damp 200–8000
Hz, BY-
PASS
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Balance #2 D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
L in
R in
L out
R out
Quadruple Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
1
23
4
L
R
MC-909_Ref_e.book 105 ページ ２００５年３月１日 火曜日 午後３時２９分