Filter
Top Products
33
Playing a pattern
Pattern Mode
Saving a chord form
A chord form you create will be lost when you turn off the power. If
you want to keep your settings, save them as follows.
1.
Hold down [CHORD MEMORY] and press [F6 (Chord
Setting)].
Alternatively, hold down [SHIFT] and press [F2 (Chord
Memory)].
The chord memory setting screen will appear.
2.
Press [F6 (Chord Write)].
A screen will appear in which you can select the user chord
form to which your settings are to be written.
3.
Use [VALUE] or [INC/DEC] to select the chord form
that you want to save.
4.
Press [F6 (Write)].
A message will ask you for confirmation.
5.
To write the data, press [F6 (Execute)].
* To cancel, press [F5 (Cancel)].
Realtime Modify section
You can use the knobs and sliders of this section to modify the sound
while it plays.
For details on the function of each knob and slider, refer to Patch
mode (p. 51).
Selecting the part whose sound
you want to modify
fig.1-06
1.
In the Part Mixer section, press [PART] (SELECT/
MUTE) so the indicator is not lighted.
Part buttons [1]–[16] will select parts.
2.
Press the button for the part whose sound you want
to modify. The button will light.
That part is now selected.
If you select a part to which a rhythm set is assigned, the FILTER
section “TYPE” indicator will go out.
This is because a rhythm set lets you select a different filter type for
each rhythm tone (percussion instrument).
Part Mixer
Here you can adjust the volume, pan, etc., of each part.
Use [F1]–[F4] to select a parameter, and use the sliders to adjust the
values.
* You can also use [CURSOR] to select a part and parameter, and then
use [VALUE] or [DEC/INC] to adjust the value.
[PART]
(SELECT/MUTE)
Selects the function of part buttons [1]–[16].
If this indicator is not lighted, the part
buttons will select parts. If lit, the part
buttons will mute parts.
[TEMPO/MUTE
CONTROL]
Switches the Tempo/Mute part (a part that
records tempo changes and mute opera-
tions, p. 42) on/off.
[MIXER ASSIGN] The Mixer screen will appear when you
press this button and get it to light.
[PART ASSIGN] Selects the parts that will be controlled by
the sliders.
If this indicator is not lighted, parts 1–8
will be controlled. If lit, parts 9–16 will be
controlled.
Sliders Adjust the volume of parts 1–8 or parts 9–16.
By accessing the Mixer screen, you can
also adjust the pan, key, and reverb depth
of each part (see illustration below).
Function button
Parameter adjusted by the sliders
[F1 (Level)]
Volume of the part
[F2 (Pan)] Left/right position of the part
[F3 (Key Shift)] Transposition of the part
The pitch will change in semitone steps
over a range of +/-4 octaves.
[F4 (Reverb Level)] Reverb level of the part
[F6 (Close)] Returns to the previous screen.
The letter displayed below the part number at the top of the
Mixer screen indicates the status of each part, as follows:
• P: playable
• M: muted
• Blank: No performance has been recorded
MC-909_Ref_e.book 33 ページ ２００５年３月１日 火曜日 午後３時２９分