Filter
Top Products
107
Multi-Effects List
Effects
46: TIME CONTROL DELAY
(MFX2 only)
This lets you smoothly vary the delay time. As the delay time is
varied, the pitch will change correspondingly; lengthening the delay
time will lower the pitch, and shortening it will raise the pitch.
fig.MFX46
47: TIME SKIP DELAY
(MFX2 only)
A delay that changes the delay time in stair-step fashion.
fig.MFX47
note:
fig.notelist2.e
Parameter
Value Description
Delay #1
0–4000 ms,
note
Adjusts the time until the delay is
heard.
Feedback
#2
-98– +98 % Adjusts the amount of the delay
that’s fed back into the effect. Nega-
tive (-) settings invert the phase.
Accelera-
tion
0–15 Adjusts the time over which the De-
lay Time changes from the current
setting to a specified new setting.
The rate of change for the Delay
Time directly affects the rate of
pitch change.
HF Damp 200–8000
Hz, BY-
PASS
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Pan L64–63R Stereo location of the delay
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
L in
R in
L out
R out
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
2-Band
EQ
Feedback
Time Control Delay
Parameter
Value Description
Delay #1
0–4000 ms,
note
Adjusts the time until the delay is
heard.
Skip Rate 0.05–10.0
Hz, note
Frequency at which the delay time
will change
Feedback
#2
-98– +98 % Adjusts the amount of the delay
sound that’s fed back into the effect.
Negative (-) settings invert the
phase.
Accelera-
tion
0–15 Adjusts the time over which the De-
lay Time changes from the current
setting to its specified new setting.
HF Damp 200–8000
Hz, BY-
PASS
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don’t want to filter
out any high frequencies, set this
parameter to BYPASS.
Pan L64–63R Stereo location of the delay
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
L in
R in
L out
R out
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
2-Band
EQ
Feedback
Time Skip Delay
(Double note)(Dotted whole note),
(Dotted half note),
(Dotted thirty-second note),
(Whole note),
(Double-note triplet),
(Sixteenth-note triplet),
(Thirty-second note),
(Sixty-fourth-note triplet), (Sixty-fourth note), (Thirty-second-note triplet),
(Dotted eighth note),(Quarter-note triplet),(Eighth note),
(Half-note triplet),(Quarter note),
(Dotted quarter note),
(Whole-note triplet),
(Half note),
(Sixteenth note),
(Eighth-note triplet),
(Dotted sixteenth note),
MC-909_Ref_e.book 107 ページ ２００５年３月１日 火曜日 午後３時２９分