Roland MC-909 Musical Instrument User Manual


 
120
Sample Edit
Emphasis
In some cases, the audio quality will be improved if you boost the
high-frequency range of an imported sample. Also, the high-
frequency range of the sample may be emphasized when you use a
sampler made by another manufacturer. In this case, you can
minimize the change in tonal character by attenuating the high-
frequency range.
1.
Press [EMPHASIS].
Alternatively, hold down [SHIFT] and press [F2 (Emphasis)].
2.
Press [F1 (Sample List)] and select a sample.
3.
Use [VALUE] or [INC/DEC] to select the emphasis
type.
PreEmphasis:
Emphasizes the high-frequency range.
DeEmphasis:
Attenuates the high-frequency range.
4.
If you want to replace the current sample with the
emphasized sample, press [F4 (Over Write)] to
display the “
” symbol.
5.
Press [F6 (Execute)].
A message will ask you for confirmation.
6.
To execute, press [F6 (Execute)].
* To cancel, press [F5 (Cancel)].
Combine
This operation combines multiple samples into a single sample. You
can combine as many as sixteen samples. You can also place silent
spaces between the samples.
1.
Press [COMBINE].
Alternatively, hold down [SHIFT] and press [F3 (Combine)].
2.
Press [F1 (Sample List)] and select a sample.
3.
Use [CURSOR] to select a parameter.
4.
Use [VALUE] or [INC/DEC] to set the value.
5.
Press [F6 (Execute)]
A message will ask you for confirmation.
6.
To execute, press [F6 (Execute)].
* To cancel, press [F5 (Cancel)].
Parameter
Range Explanation
1–16
The sample or silence to be combined
TYPE Sample,
Time, Beat
Sample:
sample
Time:
silent region (specified as
time)
Beat:
silent region (specified as a
note value)
BANK U, C Bank that contains the sample
U:
user
C:
card
* This will be displayed only if
TYPE is set to Sample.
PRM 1–10000 ms
note value:
1/32, 1/16T,
1/16, 1/8T,
1/8, 1/4T,
1/4, 1/2,
1/1, 2/1
Sample number, or the duration/
note value of the silent region
The note value is based on the
BPM of the sample immediately
before the silent region.
* If there is no sample immediate-
ly before the silent region, the
current BPM will be used.
MC-909_Ref_e.book 120 ページ 2005年3月1日 火曜日 午後3時29分