Filter
Top Products
92
Multi-Effects List
Multi-Effects Types
There are 47 types of multi-effect. MFX1 lets you use 38 types (delay-
type effects are unavailable), and MFX2 lets you use all 47 types.
Multi-Effects Parameters
Parameters with the designators “#1” and “#2” can be controlled
using the [C1] and [C2] knobs of the effect section.
01: STEREO EQ (Stereo Equalizer)
This is a four-band stereo equalizer (low, mid x 2, high).
fig.MFX01
02: SPECTRUM
This is a type of filter that modifies the timbre by boosting or cutting
the level of specific frequencies. It is similar to an equalizer, but has
eight frequency points fixed at locations most useful for adding
character to the sound.
fig.MFX02
FILTER (9 types)
01
STEREO EQ p. 92
02 SPECTRUM p. 92
03 ENHANCER p. 93
04 ISOLATOR p. 93
05 LOW BOOST p. 93
06 SUPER FILTER p. 93
07 STEP FILTER p. 94
08 AUTO WAH p. 94
09 HUMANIZER p. 94
MODULATION (7 types)
10
PHASER p. 94
11 STEREO PHASER p. 95
12 STEP PHASER p. 95
13 RING MODULATOR p. 95
14 TREMOLO p. 95
15 AUTO PAN p. 96
16 ROTARY p. 96
CHORUS (6 types)
17 HEXA-CHORUS p. 96
18 TREMOLO CHORUS p. 96
19 SPACE-D p. 97
20 STEREO CHORUS p. 97
21 STEREO FLANGER p. 97
22 STEP FLANGER p. 98
DYNAMICS (7 types)
23
OVERDRIVE p. 98
24 DISTORTION p. 98
25 GUITAR AMP SIMULATOR p. 99
26 STEREO COMPRESSOR p. 100
27 STEREO LIMITER p. 100
28 SLICER p. 100
29 GATE p. 101
LOFI (6 types)
30
LOFI NOISE p. 101
31 LOFI COMPRESS p. 102
32 LOFI RADIO p. 102
33 TELEPHONE p. 102
34 PHONOGRAPH p. 102
35 TAPE ECHO p. 103
PITCH (2 types)
36 FBK PITCH SHIFTER p. 103
37 2Vo PITCH SHIFTER p. 103
REVERB (1 type)
38
GATED REVERB p. 104
DELAY (9 types)
* These cannot be selected for MFX1.
39 STEREO DELAY p. 104
40 MODULATION DELAY p. 105
41 TRIPLE TAP DELAY p. 105
42 QUADRUPLE TAP DELAY p. 105
43 MULTI TAP DELAY p. 106
44 REVERSE DELAY p. 106
45 SHUFFLE DELAY p. 106
46 TIME CONTROL DELAY p. 107
47 TIME SKIP DELAY p. 107
Parameter
Value Description
Low Freq
200, 400 Hz Frequency of the low range
Low Gain
#1
-15– +15 dB Gain of the low frequency
range
High Freq 2000, 4000,
8000 Hz
Frequency of the high range
High Gain
#2
-15– +15 dB Gain of the high frequency
range
Mid1 Freq 200–8000 Hz Frequency of Middle Range 1
Mid1 Q 0.5, 1.0, 2.0, 4.0, 8.0 Width of Middle Range 1
Select a higher Q value to
narrow Middle Range 1.
Mid1 Gain -15– +15 dB Gain of Middle Range 1
Mid2 Freq 200–8000 Hz Frequency of Middle Range 2
Mid2 Q 0.5, 1.0, 2.0, 4.0, 8.0 Width of Middle Range 2
Select a higher Q value to
narrow Middle Range 2.
Mid2 Gain -15– +15 dB Gain of Middle Range 2
Level 0–127 Output level
Parameter
Value Description
Q
0.5, 1.0, 2.0,
4.0, 8.0
Simultaneously adjusts the
width of the adjusted ranges
for all of the frequency bands.
Pan #1 L64–63R Stereo location of the SPEC-
TRUM output
Level #2 0–127 Output level
Band 1 (250Hz) -15– +15 dB Gain of each frequency band
* This can be set using the
sliders of the part mixer.
Band 2 (500Hz)
Band 3 (1kHz)
Band 4 (1.25Hz)
Band 5 (2kHz)
Band 6 (3.15Hz)
Band 7 (4kHz)
Band 8 (8kHz)
L in
R in
L out
R out
4-Band EQ
4-Band EQ
Spectrum
L out
R out
Pan R
Pan L
L in
R in
MC-909_Ref_e.book 92 ページ ２００５年３月１日 火曜日 午後３時２９分