Filter
Top Products
61
Patch Edit
Patch/Sample Mode
Filter Env (Filter Envelope)
These parameters specify the depth of the filter envelope (time-variant change in cutoff frequency), and specify the shape of the envelope itself.
F-Env T4 V-Sens
(Filter Envelope
Time 4 Velocity
Sensitivity)
-63– +63 Amount by which the speed at which you release the pad (key-off velocity) will affect T4 (time) of the
filter envelope
Increasing this value will cause a correspondingly greater difference between slowly released and
quickly released notes. Specify a positive (+) value if you want to speed up the T4 time, or a negative
(-) value to slow it down.
Parameter
Value Description
F-Env Depth
(Filter envelope
depth)
-63– +63 Depth of the filter envelope
Increasing this value will produce a greater effect. Negative (-) values will invert the envelope.
F-Env Time KF
(Filter Envelope
Time Keyfollow)
-100– +100 Amount by which the note you play (relative to C4) will affect the filter envelope times (T2–T4)
Increasing this value will cause greater change to occur. Positive (+) values will cause the times to be-
come shorter as you play toward the right of the keyboard. Conversely, negative (-) values will cause
the times to become longer.
F-Env Time1–4 #
(Filter Envelope
Time 1–4)
0–127 Filter envelope times (T1–T4)
Higher settings of these values will lengthen the time over which the next cutoff frequency level of
the envelope is reached. (For example, T2 is the time over which the level changes from L1 to L2.)
* Realtime modify knob [A] adjusts Time 1, knob [D] adjusts Time 3, and knob [R] adjusts Time 4.
F-Env Level0–4 #
(Filter Envelope
Level 0–4)
0–127 Filter envelope levels (L1–L3)
Specifies the change in cutoff frequency at each point, relative to the reference level.
* Realtime modify knob [S] adjusts Level 3.
Parameter
Value Description
T1 T2 T3 T4
L3
L1
L2
L4
L0
Cutoff
Frequency
Time
key is
pressed
key is
released
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time
MC-909_Ref_e.book 61 ページ ２００５年３月１日 火曜日 午後３時２９分