Filter
Top Products
126
System
Here you can make settings that affect the entire system, such as
those for tuning and synchronization.
1.
Press [MENU].
2.
Press [CURSOR (up/down)] to select “System.”
In Pattern mode/Song mode, you can also access this by
holding down [SHIFT] and pressing [F5 (System)].
fig.6-01
3.
Press [ENTER].
The System menu will appear.
fig.6-02
4.
Press [F1]–[F6] to select the item that you want to
set.
5.
Press a function button to make further selections.
6.
Use [CURSOR (up/down)] to select a parameter.
7.
Use [VALUE] or [INC/DEC] to edit the value.
* Settings made here will revert to their original value as soon as you
turn off the power. If you want to keep your settings, press
[F6
(System Write)]
.
8.
When you are finished making settings, press [EXIT].
You will return to the System menu.
9.
Press [EXIT] once again to exit the System menu.
[F1 (Panel/Control)]
(Panel/Controller)
Make settings for the panel control-
lers and the screen.
[F2 (Seq/MIDI)]
(Sequencer/MIDI)
Make sequencer and MIDI-related
settings.
[F3 (Sound)] Specify the tuning and how the
sounds are to be produced.
[F4 (Sampling)] Make sampling-related settings.
[F5 (D Beam)] Make D Beam settings.
[F6 (System Info)]
(System Information)
View the state of the MC-909.
MC-909_Ref_e.book 126 ページ ２００５年３月１日 火曜日 午後３時２９分