Filter
Top Products
49
Pattern editing
Pattern Mode
Inserting performance data
(Create)
Here’s how to insert new performance data at a desired location in a
pattern.
1.
Press [F1 (Create)].
The Create Event window will appear.
2.
Use [VALUE] or [INC/DEC] to select the performance
data that you want to insert.
3.
Press [F6 (OK)].
The Create Position window will appear.
4.
Use [CURSOR (left/right)] to move the cursor to the
“measure,” “beat,” and “clock” fields, and use
[VALUE] or [INC/DEC] to specify the location at
which the data will be inserted.
5.
Press [F6 (OK)] to insert the performance data.
6.
The parameters of the inserted performance data will
have the default values, so edit the values as
necessary.
Erasing performance data (Erase)
Here's how to erase only a single specific event of performance data.
1.
Use [CURSOR (up/down)] to move the cursor to the
performance data that you want to erase.
2.
Press [F2 (Erase)] to erase that performance data.
Moving performance data
(Move)
Here's how to move a performance data event to a different location.
1.
1. Use [CURSOR (up/down)] to move the cursor to
the performance data that you want to move.
2.
Press [F3 (Move)].
The Move Event window will appear.
3.
Use [CURSOR (left/right)] to move the cursor to the
“measure,” “beat,” and “clock” fields, and use
[VALUE] or [INC/DEC] to specify the location to
which the data will be moved.
4.
Press [F6 (OK)] to move the performance data.
Copying performance data
(Copy)
Here's how to copy a performance data event to the specified
location. This is convenient when you want to use the same
performance data two or more times.
1.
Use [CURSOR (up/down)] to move the cursor to the
performance data that you want to copy.
2.
Press [F4 (Copy)] to copy the event.
3.
Press [F5 (Place)].
The Place Event window will appear.
4.
Use [CURSOR (left/right)] to move the cursor to the
“measure,” “beat,” and “clock” fields, and use
[VALUE] or [INC/DEC] to specify the location to
which the data will be pasted.
5.
Press [F6 (OK)] to paste the performance data.
Editing a system exclusive
message
1.
Press [TEMPO/MUTE CONTROL] to select the tempo/
mute part.
2.
Use [CURSOR (up/down)] to move the cursor to the
location of the system exclusive message that you
want to edit.
3.
Press [CURSOR (right)].
The System Exclusive Edit window will appear.
4.
Use [CURSOR] to move the cursor to the location of
the data that you want to edit.
5.
Use [VALUE] or [INC/DEC] to edit the value.
6.
Press [F6 (OK)] to finalize the data.
Function buttons
[F1 (Auto Sum)]
If the message is a Roland type IV system ex-
clusive message, you can calculate the check-
sum automatically when the values are
finalized. If this displays a “
✔
” mark, the
check sum will be calculated automatically
when the data values are finalized.
[F2 (Delete)] Deletes the data at the cursor location.
[F3 (Insert)] Inserts data at the cursor location.
[F4 (Test)] Transmits the data being edited from the
MIDI OUT connector.
[F5 (Cancel)] Cancels the change in the data.
[F6 (OK)] Finalizes the data.
MC-909_Ref_e.book 49 ページ ２００５年３月１日 火曜日 午後３時２９分