Filter
Top Products
13
Mix 16 tracks down to 2 tracks (Mastering Room)
14. Hold down [STOP], and press [STATUS] for all tracks
(1–15/16) that you wish to mixdown. The STATUS
indicator will light in green.
fig.2-06
15. Press [FADER] so that the TR (track) indicator lights.
fig.2-07.e
16. Press [PLAY]. The song will play back.
17. Raise and lower the master fader, and verify that the
volume of each track changes.
MEMO
The sound that has passed through the master fader will be
recorded on the mastering tracks. In order to record at the
optimal audio quality, you will normally set the master
fader to 0 dB.
18. Use the channel faders (1–15/16) to adjust the volume
balance of the tracks. At this time, the sound (volume
level and pan) that is output from the MASTER jacks will
be recorded “as is” to the mastering tracks. Adjust the
volume to as high a level as possible without causing
distortion.
19. When you are finished adjusting the volume, press
[STOP].
20. Move to the time location at which you wish to begin the
mixdown (e.g., 00h00m00s00f).
21. Change the “Status” of the mastering tracks to “Rec.”
22. Press [REC]. The REC indicator will light in red.
23. Press [PLAY]. The PLAY indicator will light in green,
and recording will begin.
24. When you finish recording, press [STOP].
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Signal flow (routing)
fig.2-24
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Lit
Dark
TR1
MASTER
MIX
Sw
MIX
LR
Track 1--16
TR15-16
TR16-16
Mastering
Track
MASTER OUT
MONITOR OUT
EFX (Insert)