Filter
Top Products
39
Enhancements to the display and
specifications
Checking inserted effects
(Icon and Patch Name
display)
Effects that have been inserted into channels/tracks can now
be confirmed through icons and patch names.
1. Press [SELECT] for the channel to which you wish to
apply an effect.
2. Press [PAGE] so that [F1] indicates “Ef1In,” and then
press [F1 (Ef1In)].
fig.7-01
MEMO
If you wish to insert EFX2–4, press [F2 (Ef2In)], [F3 (Ef3In)],
or [F4 (Ef4In)] respectively.
3. Press [YES].
4. Use the TIME/VALUE dial to select how the effect will
be inserted. At this time you can view the effect as an
icon and as a patch name (up to ten characters).
fig.7-02.e
5. Press [PLAY (DISPLAY)]. You will return to Play
condition.
Checking effects that cannot
be used in other channels
(Effect insertion location
display)
When there are effects which cannot be used for a channel/
track (because they are inserted into another channel/track),
the location of the effect inserted is now displayed.
1. Press [SELECT] for the channel to which you wish to
apply an effect.
2. Press [PAGE] so that [F1] indicates “Ef1In,” and then
press [F1 (Ef1In)].
fig.7-01
MEMO
If you wish to insert EFX2–4, press [F2 (Ef2In)], [F3 (Ef3In)],
or [F4 (Ef4In)] respectively.
3. Press [YES].
4. Use the TIME/VALUE dial to select how the effect will
be inserted. At this time, you can view the effects that are
inserted into other channels/tracks.
Icon
Patch Name