Filter
Top Products
31
Enhancements related to operation
fig.6-04.e
fig.6-05.e
fig.6-06.e
7. Use the TIME/VALUE dial to select the take that will be
the basis of the newly created phrase.
8. Press [F4 (Sel)] or [ENTER (YES)].
9. Use [ ][ ][ ][ ] to move the cursor, and use
the TIME/VALUE dial to set the parameters.
fig.6-07
Take
This will show the take that you selected in step 8. You may
re-select the take if desired.
Track
Select the track on which you wish to create the new phrase.
To
Specify the time at which you wish to create the new phrase.
10. Press [F4 (Exec)]. The Phrase New command will be
executed.
11. When the display indicates “Complete,” press
[PLAY (DISPLAY)]. You will return to Play condition.
Deleting a take (Delete)
NOTE
A deleted take cannot be recovered by the Undo function (VS-1680
Owner’s Manual, p. 160).
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F2 (TRACK)].
3. Press [F1 (Tr/Ph)] so that the Phrase Edit menu appears.
4. Press [PAGE] so that [F3] indicates “New,” and then
press [F3 (New)].
The order in which the takes were recorded
The order of the V-tracks on which the takes are recorded
The alphabetical order of the take names