Filter
Top Products
36
Enhancements related to operation
NOTE
If you rotate the MONITOR knob without pressing [SELECT],
you will adjust the volume level. If you are attempting to adjust
pan and inadvertently rotate the MONITOR knob toward the right
without pressing [SELECT], high-volume sound capable of
damaging your amp or speakers could be output.
MEMO
When you release [SELECT] after adjusting the pan, the edit
screen of that channel may appear, but the MONITOR knob
will adjust the pan only for the channel whose [SELECT]
button is being pressed. For example even when the edit
screen for track 1 is displayed, rotating the MONITOR knob
while holding down the track 2 [SELECT] button will adjust
the track 2 pan.
Linking the faders of two or
more channels
(Fader Group)
The faders of two or more channels (inputs/tracks) can now
be assigned to groups, so that when the fader of any channel
is operated, the fader levels (volume levels) of all channels in
that group will be adjusted as well.
When fader group settings have been made, you can adjust
the overall volume of a group while preserving the volume
balance of the channels included in that group.
fig.6-25.e
1. Press [SELECT (CH EDIT)] for the channel (input/track)
you wish to assign to a fader group.
2. Press [PAGE] so that [F4] indicates “Group,” and then
press [F4 (Group)].
fig.6-26
3. Press [F6 (PRM.V)].
4. Use [ ][ ][ ][ ] to move the cursor, and use
the TIME/VALUE dial to set the parameters.
fig.6-27
Group
Select the group (1–8) to which you wish to assign the fader.
Channels for which the same number is selected will be
assigned to the same group. Moving any fader within the
group will adjust all faders of that group.
If you select “Off,” the fader will not be assigned to any
group (normal operation).
5. Press [PLAY (DISPLAY)]. You will return to Play
condition.
An image of fader group
(Faders cannot be moved.)