Filter
Top Products
37
Enhancements related to operation
Copying mixer settings
You can copy mixer settings (equalizer, level) from another
channel to the channel currently shown in the Channel Edit
page.
The following settings can be copied.
Equalizer
EQ low freq.
EQ low gain
EQ mid freq.
EQ mid gain
EQ mid Q
EQ high freq.
EQ high gain
Level
ATT
Phase
EFX1 insert send level
EFX1 insert return level
EFX2 insert send level
EFX2 insert return level
EFX3 insert send level
EFX3 insert return level
EFX4 insert send level
EFX4 insert return level
Fader
MASTER send pan
EFX1 send level
EFX1 send pan
EFX2 send level
EFX2 send pan
EFX3/AUX1 send level
EFX3/AUX1 send pan
EFX4/AUX2 send level
EFX4/AUX2 send pan
AUX/AUX3 send level
AUX/AUX3 send pan
1. Press [CH EDIT (SELECT)] for the copy-destination
channel.
2. Press [PAGE] so that [F5] indicates “Copy,” and then
press [F5 (Copy)].
fig.6-28
3. Use the TIME/VALUE dial to select the copy-source
channel.
fig.6-29
NOTE
If the Channel Link setting is OFF for the copy-destination
channel, the Channel Link setting of the copy-source channel will
be considered as OFF even though it may actually be ON, and only
the settings of individual channels will be copied. Similarly, when
Channel Link is ON for the copy-destination channel, Channel
Link of the copy-source channel will be considered to be ON even
though it may actually be OFF, and the settings of both channels
will be copied.
4. Use the function buttons to select the settings that will be
copied.
[F1 (CpyEQ]: Copy only the equalizer settings.
[F2 (CpyLv]: Copy only the level settings.
[F4 (Exec] or [ENTER (YES)]:
Copy both the equalizer and level settings.
[F6 (EXIT] or [EXIT (NO)]:
Exit the window without copying.
5. When the data has been copied, the display will indicate
“Complete.” Press [PLAY (DISPLAY)].