Filter
Top Products
13
1 PEAK indicator
Lights in red when the output signal
reaches –3 dB from a clipping level.
When the output compressors/limiters
activate, this indicator lights to
indicate the compressor/limiter
operations, as follows.
When the input level exceeds the
preset threshold level, the output
compressors activate and the indicator
lights in orange.
When the input level exceeds the
preset threshold level, the limiters
activate and the indicator lights in red.
The OUTPUT COMP L and OUTPUT
COMP R sub-menus of the SETUP
menu allow you to make settings of
the threshold level for the
compressors/limiters.
2 MASTER LINK switch
Setting the switch to the LINK
position links the Left channel output
and Right channel output of the master
output. The L MASTER volume
control adjusts the output level of both
channels. In this case, the R MASTER
volume control is not activated. This
function is not applied to the output
compressor/limiter.
3 L/R MASTER volume control
Adjusts the output level. The
adjustable range is – ∞ dB at the fully
counterclockwise position, 0 dB and
+10 dB at the fully clockwise position.
Left Panel
1 Battery compartment
2 DC OUT connector
3 INPUT connector
4 LINE/MIC/MIC +48V switch5 CASCADE IN connector
1 Battery compartment
Accommodates eight LR6 (size AA)
alkaline batteries.
2 DC OUT connector (4-pin,
female)
Supplies the power to a UHF portable
tuner WRR-860A/861A/862A
(option).