Filter
Top Products
20
Display in the Display Mode
The display mode, when the
FUNCTION switch is set to
DISPLAY, allows you to display all
kinds of meters, the unit operating
status and so on. In day-to-day
operation, use the unit in the display
mode. In display mode, four kinds of
screen display are available.
Select a desired screen display as
follows.
12
1 Set the FUNCTION switch to
DISPLAY.
2 Display the desired screen display
by turning the ADJUST knob.
For detailed information on the
display mode, see the following
“About the display mode.”
About the display mode
There are four kinds of screen display,
as follows.
Full size level meter
Displays only the signal level.
This mode is suitable when you want
to monitor the signal level.
Multi meter
Displays the accumulating time, level
meter, and battery indicator. This is
the default setting.
When you use the internal battery:
You can confirm the amount of
battery power remaining.
When you use an external battery:
For detailed information on the
battery indicator, see “Battery life”
on page 40.