Filter
Top Products
26
To move to another sub-menu
1 When the cursor blinks beside the
setting item just set, turn the
ADJUST knob to the left until the
return mark to the left of the top
setting item appears and blinks.
2 Press the ADJUST knob.
The sub-menu appears.
3 Turn the ADJUST knob to the left
or right until the desired sub-menu
appears, and then press the
ADJUST knob.
When you cannot enter the
setting mode from the sub-menu
That sub-menu has been locked to
prevent misoperation using 9.
PARAMETER LOCK sub-menu. To
perform settings on that sub-menu,
unlock it using the 9. PARAMETER
LOCK sub-menu.
LOCK blinks.
For details, see “9. PARAMETER
LOCK Sub-Menu” on page 31.
1. SCENE RECALL Sub-
Menu
Recalling a scene
1 Turn the ADJUST knob until the
1. SCENE RECALL sub-menu
appears, and then press the
ADJUST knob.
The scene currently recalled is enclosed
in parentheses.
Note
If parameters included in the
currently recalled scene are
changed using a sub-menu, the
parentheses disappear from the
currently recalled scene indicator.
2 Turn the ADJUST knob until the
scene number to be recalled
blinks.
Turning the ADJUST knob to the
right changes the scene number in
the following sequences: SCENE
0 t SCENE 1 t SCENE 2
......SCENE 8 t SCENE 9 t
DEF.
Turning the ADJUST knob to the
left changes the scene number in
the reverse order.
3 Press the ADJUST knob.
The scene selected in step 2 is
recalled. This recalled scene
number is enclosed in
parentheses.
Settings from the Setup Menu