Filter
Top Products
31
Note
When L-R LINK is set to ON, you
cannot work on the 8. OUTPUT
COMP R sub-menu. If you select the
8. OUTPUT COMP R sub-menu and
press the ADJUST knob, the
following message appears.
9. PARAMETER LOCK
Sub-Menu
This sub-menu allows you to lock
parameters set on the following sub-
menus.
• 4. LCF
• 5. CH LINK/M-S
• 6. INPUT LIMITER
• 7. OUTPUT COMP L
• 8. OUTPUT COMP R
• 11. METER SELECT
You can select the lock function on
each sub-menu.
9. PARAMETER LOCK sub-
menu
Turning the ADJUST knob to the right
changes the setting item in the
following sequence: METER t LCF
t IN LIMIT t OUT COMP (including
L and R) t LINK/M-S.
Turning the ADJUST knob to the left
changes the selection changes in the
following sequence: UNLOCK t
LOCK.
Default setting: UNLOCK
For locked sub-menus
LOCK is displayed (blinking) at the
top right of the sub-menu. On this sub-
menu you cannot change to the setting
mode even if you press the ADJUST
knob.