Filter
Top Products
38
Miscellaneous
Preparing a Power
Supply
The unit can be powered in the
following two ways:
• Internal batteries
Eight LR6 (size AA) alkaline
batteries can be accommodated in the
battery compartment.
• External battery
A lithium ion battery or nickel metal
hydride battery which is connected to
the DC IN 10 - 15 V connector on
the right panel. The unit is equipped
with two types of DC IN 10 - 15 V
connector, an XLR 4-pin and a DC
jack type connector. Use either one
depending on the external battery
you are using.
Notes
• Do not connect external batteries to
both the 4-pin of the XLR type
connector and the DC jack type
connector at the same time.
Be sure to connect the external
battery to either one.
Connecting external batteries to
both connectors may cause the
deterioration of the external
batteries.
• Do not connect the external battery
other than the BP-90 type battery to
the DC jack type connector,
because the polarity of the DC jack
is different.
When both internal batteries and
an external battery are used
When the power of the unit is turned
on, the power is supplied from the
external battery. Since the unit can be
powered by an external battery while
preserving the life of the internal
batteries, the power supply is switched
from internal batteries if the DC cord
is disconnected accidentally or the
external battery is shut down
suddenly.
Inserting the Batteries
in the Battery
Compartment
1 Pull the battery compartment
toward you by pressing the lock
levers.
2 Open the cover of the battery
compartment by loosening the
screw as illustrated.
Lock levers