Filter
Top Products
TASCAM DR-100
21
4–Preparation for Use
Card write protection
SD cards have protect switches that prevent
writing new data to them.
Unprotected Protected
If you slide the protect switch to the "LOCK"
position, le recording and editing is not possible.
Move the switch to the unlocked position in order
to record, erase and otherwise edit data on the
card.
Setting the date and time
Using its internal clock, this unit remembers the
date and time when a le is recorded.
1 Press the MENU key to open the
MENU
screen.
2 Use the wheel to select DATE/TIME, and press the
ENTER/MARK key.
3 Use the µ/≤ keys to move the cursor, and use
the wheel to change values.
4 Press the ENTER/MARK key to confirm the change
and return to the
MENU
screen.
NOTE
You can set the unit to automatically add the date and
time to file names. (See “Setting the file name format”
on page 42.)
CAUTION
The date and time setting can only be maintained
for a few minutes when the unit is not powered by
batteries or an AC adapter. When using batteries, we
recommend that you replace or recharge them before
they completely lose power.
Using the built-in speaker
Set the SPEAKER switch to ON to listen to a playing
track through the built-in speaker.
NOTE
Even when ON, no sound is output during recording,
in recording standby or when headphones are
connected.
Connecting monitors and
headphones
To listen with headphones, connect them to the
connector.
To listen with an external monitoring system
(powered speakers or an audio system), connect it
to the LINE OUT connector.
Headphones
Powered speakers
or audio system