Filter
Top Products
TASCAM DR-100
29
6–Recording
Automatic recording (AUTO REC)
This function allows the unit to respond to input
sound levels and start and pause recording,
as well as set marks and create new les, for
example.
This function is convenient for recording only
when people are speaking during meetings,
creating marks for nding the starts of songs and
dividing les after recording, and automatically
dividing les.
MODE
MARK
Automatically adds marks during recording
PAUSE
Automatically pauses during recording
TRK INC
Automatically creates new les during recording
START LEVEL
Signal is judged to have been input when it
exceeds this level
END LEVEL
Signal is judged to have stopped when it becomes
less than this level
END DELAY
Time that recording continues after the signal
level becomes less than the
END LEVEL
NOTE
If you press the AUTO key when recording or in •
recording standby, the current AUTO REC setting
can be checked.
When AUTO REC is on, the RECORD [• º] key will
blink more rapidly than usual In recording standby.
Overdub recording is not possible when using the •
AUTO REC function.
Enabling automatic recording
When the input signal exceeds the
START LEVEL
recording begins automatically.
NOTE
The MODE setting does not affect this function.
1 Press the AUTO key to open the
AUTO REC
screen.
2 Set the value of the
START LEVEL
item.
3 Press the HOME key to return to the Home
Screen.
4 Press the RECORD (º) key while holding down
the AUTO key to put the unit into recording
standby.
Recording starts automatically when the input
signal exceeds the
START LEVEL
.
NOTE
Press the STOP (ª) key to stop automatic recording.
Automatically adding marks when
recording (MARK)
The unit can be set to automatically add marks
to les during recording after they become less
than the
END LEVEL
setting and the
END DELAY
time
passes. Marks can also be automatically added
when the input signal exceeds the
START LEVEL
setting again.
1 Press the AUTO key to open the
AUTO REC
screen.
2 Set the
MODE
item to
MARK
.
3 Set the value of the
END LEVEL
item.
4 Set the value of the
START LEVEL
item.
5 Press the HOME key to return to the Home
Screen.
6 Press the RECORD (º) key while holding down
the AUTO key to put the unit into recording
standby.
Recording starts automatically when the input
signal exceeds the
START LEVEL
value.
NOTE
Press the STOP (• ª) key to stop automatic recording.
You can also add marks manually. (• See “Adding
marks manually to a recording” on page 30.)