Filter
Top Products
Stereo Output Delay 91
01V—Owner’s Manual
Stereo Output Delay
The left and right channels of the stereo output can be delayed individually by up to
300 milliseconds. This can be used to compensate for delays in multi-speaker sound
reinforcement systems.
1. Use the [∅/DELAY] button to locate DELAY page 4, as shown below.
2. Use the cursor buttons to select the delay parameters and the [ENTER]
button, PARAMETER wheel, or [–1/DEC] and [+1/INC] buttons to set
them.
Parameter Range Description
ON/OFF
ON/OFF These switches are used to turn on and off the delays.
DELAY
0–300 ms
Delay can be specified in milliseconds, meters, or samples
(“Setting 01V Preferences” on page 203). The maximum
delay in samples is fixed at 13229. The maximum delay in
milliseconds and meters depends on the sampling rate. At
44.1 kHz, for example, it is 300 milliseconds and 102.2
meters, respectively.