Filter
Top Products
Fader Modes 33
01V—Owner’s Manual
channels 13 and 14 (likewise 15 and 16) are linked, the only time you’ll need to select
these channels individually is to set the Phase or Pan. (If a fader mode other than
Option I/O or Remote is selected, it’s not necessary to press the [HOME] button.)
To select the EQ function for input channel 20, press the [OPTION I/O] button, and
then press [SEL] button 20 (CH20 appears on the display). Use the F and G controls to
adjust the EQ.
Master [SEL] Button Examples
To select the stereo output, press the [HOME] button, and then press the MASTER
[SEL] button (ST appears in the bottom right corner of the display).
To select the AUX 1 master, press the [AUX 1] button, and then press the MASTER
[SEL] button (AUX1 appears on the display).
To select the EFFECT 1 master, press the [EFFECT 1] button, and then press the MAS-
TER [SEL] button (EFF1 appears on the display).
Solo Buttons
The [SOLO] buttons are used to solo channels for monitoring. See “Solo Setup” on
page 80 for more information. The following channels can be soloed:
•
CH1 through CH24—Input channels 1 through 24
•
RTN1, RTN2—Effects returns 1 and 2
The [SOLO] buttons 1 through 16 can be used as MIDI controllers on REMOTE page
3. See “User Defined MIDI Controllers” on page 238 for more information.
Usage Examples
To solo input channel 3, press the [HOME] button, and then press [SOLO] button 3.
(If a fader mode other than Option I/O or Remote is selected, it’s not necessary to press
the [HOME] button.)
To solo input channels 13/14, press the [HOME] button, and then press [SOLO] button
13/14. (If a fader mode other than Option I/O or Remote is selected, it’s not necessary
to press the [HOME] button.)
To solo input channel 20, press the [OPTION I/O] button, and then press [SOLO] but-
ton 20.
*1. CH17–20 with four-input Option I/O cards.
Fader Mode
SOLO button
1–8
[17–24]
9–12 13/14
15/16
RETURN 1/2
HOME
CH 1–16 solo
RETURN 1/2
solo
AUX 1
AUX 2
AUX 3
AUX 4
EFFECT 1
EFFECT 2
OPTION I/O
CH 17–24
*1
solo
———
REMOTE 1
—
REMOTE 2
—
REMOTE 3
User defined MIDI controller —