Filter
Top Products
146 Chapter 12—Effects
01V—Owner’s Manual
RING MOD.
Ring modulator.
MOD.FILTER
LFO modulation-type filter.
DISTORTION
Distortion effect.
1.
2. For more information about the FM FREQ., NOTE FM, and TEMPO parameters, see
“Setting Delay, Freq, Note & Tempo Parameters” on page 137.
1.
2. For more information about the FREQ., NOTE, and TEMPO parameters, see “Setting
Delay, Freq, Note & Tempo Parameters” on page 137.
Parameter Range Description
SOURCE OSC, SELF Modulation source: oscillator or input signal
OSC FREQ 0.0–3000.0 Hz Oscillator frequency
FM FREQ 0.05–40.00 Hz Oscillator frequency modulation speed
NOTE FM
*1
Used in conjunction with TEMPO to determine FM
FREQ
FM DEPTH 0–100% Oscillator frequency modulation depth
TEMPO
*2
25–300 bps
Used in conjunction with NOTE FM to determine FM
FREQ
Parameter Range Description
FREQ. 0.05–40.00 Hz Modulation speed
NOTE
*1
Used in conjunction with TEMPO to determine FREQ
DEPTH 0–100% Modulation depth
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0–100 Filter frequency offset
RESO. 0–20 Filter resonance
PHASE 0.00–354.38°
Left-channel modulation and right-channel
modulation phase difference
LEVEL 0–100 Output level
TEMPO
*2
25–300 bps Used in conjunction with NOTE to determine FREQ.
Parameter Range Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0–100 Distortion drive
MASTER 0–100 Master volume
TONE –10 to +10 Tone
N.GATE 0–20 Noise reduction