Filter
Top Products
268 Appendix B: Specifications
01V—Owner’s Manual
Analog Inputs
Analog Outputs
*1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when
the 01V is set to maximum gain (all faders and level controls at maximum positions).
*2. Input channel XLR-type connectors are balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
*3. Input channel phone jacks are balanced (tip = hot, ring = cold, sleeve = ground).
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
* For 2TR IN levels, 0 dBV is referenced to 1.00 V rms.
* Input channels 1–16 and ST IN use linear 20-bit 128-times oversampling A/D converters.
* +48 V DC phantom powering switched in 6-channel blocks (1-6, 7-12) available via the XLR-type connectors
of input channels 1–12
*1. STEREO OUT XLR-type connectors are balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
*2. OMNI/MONITOR OUT TRS phone jacks are balanced (tip = hot, ring = cold, sleeve = ground).
*3. PHONES stereo phone jack is unbalanced (tip = send, ring = return, sleeve = ground).
* For 2TR OUT, 0 dBV is referenced to 1.00 V rms.
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
* STEREO OUT uses 20-bit 8-times oversampling D/A converters.
* OMNI OUT 1–4 and MONITOR OUT use 18-bit 8-times oversampling D/A converters.
Connection PAD GAIN
Actual
Load
Impedance
For Use
With
Nominal
Input level
Connector in
Console
Sensitivity
*1
Nominal
Max.
Before Clip
Input chan-
nels 1–12
0 –60
3 kΩ
50–600 Ω
Mics
&
600 Ω Lines
–66 dB
(388 µV)
–60 dB
(775 µV)
–46 dB
(3.88 mV)
XLR-3-31 type
(balanced)
*2
&
TRS phone jack
(balanced)
*3
0
–16
–22 dB
(61.6 mV)
–16 dB
(123 mV)
–2 dB
(616 mV)
26
+4 dB
(1.23 V)
+10 dB
(2.45 V)
+24 dB
(12.3 V)
Input channels
13–16
–20
10 kΩ 600 Ω Lines
–26 dB
(38.8 mV)
–20 dB
(77.5 mV)
–6 dB
(388 mV)
TRS phone jack
(balanced)
3
+10
+4 dB
(1.23 V)
+10 dB
(2.45 V)
+24 dB
(12.3 V)
2TR IN (L, R) 10 kΩ 600 Ω Lines
–10 dBV
(316 mV)
–10 dBV
(316 mV)
+4 dBV
(1.58 V)
Phono
(unbalanced)
Connection
Actual
Source
Impedance
For Use
With
Nominal
Output Level
Connector in Console
Nominal
Max. Before
Clip
STEREO OUT (L, R) 150 Ω 600 Ω Lines
+4 dB
(1.23 V)
+18 dB
(6.16 V)
XLR-3-32 type
(balanced)
*1
OMNI OUT (1–4) 150 Ω 10 kΩ Lines
+4 dB
(1.23 V)
+18 dB
(6.16 V)
TRS phone jack
(balanced)
*2
2TR OUT (L, R) 600 Ω 10 kΩ Lines
–10 dBV
(316 mV)
+4 dBV
(1.58 V)
Phono (unbalanced)
MONITOR OUT (L, R) 150 Ω 10 kΩ Lines
+4 dB
(1.23 V)
+18 dB
(6.16 V)
TRS phone jack
(balanced)
2
PHONES 100 Ω
8 Ω phones 4 mW 25 mW
Stereo phone jack
(unbalanced)
*3
40 Ω phones 12 mW 75 mW