Filter
Top Products
MIDI Data Format 283
01V—Owner’s Manual
PARAMETER VALUE REQUEST (type 0x00:edit
buffer, 0x01:sysytem memory)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this message will be echoed
if the device itself did not receive the message.
When this message is received, the value of the specified parameter
will be transmitted as a Parameter Change message.
Transmission
When [Parameter Change ECHO] is ON, this message will be trans-
mitted without change if the device itself did not receive the message.
The system memory will depend on the address, as follows.
PARAMETER CHANGE (type 0x02:function call)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this message will be ech-
oed.
When this message is received, the corresponding mem-
ory/library/table will be recalled/stored/cleared.
* [0x00:scene recall] is transmitted only when a program which is not
assigned to the program change table has been recalled. In other
cases, a program change will normally be transmitted.
PARAMETER CHANGE (type 0x02:function
call(title))
Reception
When [Parameter Change RX] is ON and the [Rx CH] matches the
Device Channel included in the SUB STATUS, this message will be
received.
When [Parameter Change ECHO] is ON, this message will be ech-
oed.
When this message is received, the title of the corresponding mem-
ory/library will be modified.
Transmission
Parameter Change messages are transmitted on the [Rx CH] channel
in response to a request.
If 01V receives a bulk request for an empty memory, TITLEs are not
transmitted.
PARAMETER VALUE REQUEST (type 0x02:function
call(title))
Reception
When [Parameter Change RX] is ON and the [Rx CH] matches the
Device Channel included in the SUB STATUS, this message will be
received.
When [Parameter Change ECHO] is ON and the 01V itself did not
receive the message, the message will be echoed.
When this is received, the title of the corresponding memory/library
will be transmitted.
Transmission
When [Parameter Change ECHO] is ON and the 01V itself did not
receive the message, the message will be echoed.
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0011nnnn 3n parameter request n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00tttttt tt 00:edit buffer, 01:system memory (type)
DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address
0aaaaaaa dd1 address( L) low 7 bits of 14 bits address
0ddddddd dd count
EOX 11110111 F7 End Of Exclusive
0x0000 - 0x007F : setup memory(128byte)
0x0080 - 0x0147 : backup memory(200byte)
0x0200 : card type(1byte)
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00000010 02 function call
DATA 0ddddddd dd0 function
0ddddddd dd1 number
0ddddddd dd2 channel
EOX 11110111 F7 End Of Exclusive
function number channel Tx/Rx
-----------------------------------------------------------------------------------------
0x00 scene recall 0-99(memory 0-99) 0x7f Tx* /Rx
0x01 eq lib recall 0-79(library 1-80) 0-19,22 Tx/Rx
0x02 dyn lib recall 0-79(library 1-80) 0-13,16-19,22 Tx/Rx
0x03 eff lib recall 0-98(library 1-99) 0,1 Tx/Rx
0x10 scene store 1-99(memory 1-99) 0x7f Rx only
0x11 eq lib store 40-79(library 41-80) 0-19,22 Rx only
0x12 dyn lib store 40-79(library 41-80) 0-13,16-19,22 Rx only
0x13 eff lib store 42-98(library 43-99) 0,1 Rx only
Channel 0-11(ch1-12), 12-13(13/14-15/16), 14-15(return 1-2),
16-19(aux 1-4), 22(st mas), 23-30(ch17-24)
0,1(EFF1,2 for eff lib recall/store), 0x7f(current/edit
buffer)
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change or response
n=0-15(Device Channel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00000010 02 function call
DATA 0ddddddd dd0 function
0ddddddd dd1 number
0ddddddd dd2 title1(If data is empty, TITLEs are not
transmitted.)
: :
0ddddddd ddn title-n
EOX 11110111 F7 End Of Exclusive
function number
---------------------------------------------------------------------------------------------
0x30 scene title 0-99(mem 0-99),0x7f(edit buffer) for response
1-99(mem 1-99),0x7f(edit buffer) for Rx
0x31 eq lib title 0-79(library 1-80) for response
40-79(library 41-80) for Rx
0x32 dynamics lib title 0-79(library 1-80) for response
40-79(library 41-80) for Rx
0x33 eff lib title 0-98(library 1-99) for response
42-98(library 43-99) for Rx
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0011nnnn 3n parameter request n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00000010 02 function call
DATA 0ddddddd dd0 function
0ddddddd dd1 number
EOX 11110111 F7 End Of Exclusive
function number
---------------------------------------------------------------------------
0x30 scene title 0-99(mem 0-99),0x7f(edit buffer)
0x31 eq lib title 0-79(library 1-80)
0x32 dynamics lib title 0-79(library 1-80)
0x33 eff lib title 0-98(library 1-99)