Filter
Top Products
Cursor Buttons 31
01V—Owner’s Manual
Cursor Buttons
The cursor buttons are used to move the cursor
around the display pages, selecting parameters and
options. The cursor appears as a flashing box, making
it easy to see which parameter or option is currently
selected. Holding down a cursor button moves the
cursor continuously in the respective direction.
PARAMETER Wheel
The PARAMETER wheel is used to adjust parameter values, scroll
through scene memory and library programs, and position the
cursor when titling scene memories, effects programs, and so on.
Its detented action gives it a positive feel, allowing quick and accu-
rate parameter editing. Turning it clockwise increases parameter
values; turning it counterclockwise decreases them.
–1/DEC & +1/INC Buttons
Like the PARAMETER wheel, the [–1/DEC] and [+1/INC]
buttons are used to adjust parameter values, scroll through
scene memory and library programs, and position the cur-
sor when titling scene memories, effects programs, and so
on. The [–1/DEC] button is used to decrement values, while the [+1/INC] button is
used to increment them. Holding down the [–1/DEC] or [+1/INC] button sweeps
through a parameter’s adjustable range. When titling memories or programs, the
[–1/DEC] button is used to toggle between uppercase, lowercase, and numerals, while
the [+1/INC] button is used to insert spaces.
ENTER Button
The [ENTER] button is used to activate parameter settings selected using
the [CURSOR] buttons, and set on/off-type parameters, such as EQ
ON/OFF. It’s also used to confirm settings and enter characters when titling
scene memories, effects programs, and so on. On the EQ page, the [ENTER] button is
used solely to turn the EQ on and off.
CURSOR
PARAMETER
PARAMETER
–1/DEC +1/INC
ENTER