Filter
Top Products
142 Chapter 12—Effects
01V—Owner’s Manual
ECHO
Stereo delay with crossed feedback loop.
CHORUS
Chorus effect.
1. (Maximum value depends on
the tempo setting)
2. For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting
Delay, Freq, Note & Tempo Parameters” on page 137.
1.
2. For more information about the FREQ., NOTE, and TEMPO parameters, see “Setting
Delay, Freq, Note & Tempo Parameters” on page 137.
Parameter Range Description
DELAY L 0.0–1350.0 ms Left channel delay time
NOTE L
*1
Used in conjunction with TEMPO to determine DELAY
L
FB.G L –99 to +99%
Left channel feedback gain (plus values for
normal-phase feedback, minus values for
reverse-phase feedback)
DELAY R 0.0–1350.0 ms Right channel delay time
NOTE R *1
Used in conjunction with TEMPO to determine DELAY
R
FB.G R –99 to +99%
Right channel feedback gain (plus values for
normal-phase feedback, minus values for
reverse-phase feedback)
FB.D L 0.0–1350.0 ms Left channel feedback delay time
NOTE FBL *1 Used in conjunction with TEMPO to determine FB.D L
L->R FB.G –99 to +99%
Left to right channel feedback gain (plus values for
normal-phase feedback, minus values for
reverse-phase feedback)
FB.D R 0.0–1350.0 ms Right channel feedback delay time
NOTE FBR *1 Used in conjunction with TEMPO to determine FB.D R
R->L FB.G –99 to +99%
Right to left channel feedback gain (plus values for
normal-phase feedback, minus values for
reverse-phase feedback)
HI.RATIO 0.1–1.0 High-frequency feedback ratio
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
TEMPO
*2
25–300 bps
Used in conjunction with NOTE parameters to
determine DELAY L, DELAY R, FB.D L, and FB.D R
Parameter Range Description
FREQ. 0.05–40.00 Hz Modulation speed
NOTE
*1
Used in conjunction with TEMPO to determine FREQ.
DEPTH 0–100% Modulation depth
MOD.DLY 0.0–500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
TEMPO
*2
25–300 bps Used in conjunction with NOTE to determine FREQ.