Filter
Top Products
Setting 01V Preferences 203
01V—Owner’s Manual
Setting 01V Preferences
The Preferences are used to customize the operation of the 01V.
1. Use the [UTILITY] button to locate UTILITY page 2 or 3, as shown below.
2. Use the cursor buttons to select the parameters, and the [ENTER] button,
PARAMETER wheel, or [–1/DEC] and [+1/INC] buttons to set them.
EQ AUTO SCREEN—When this option is turned on, EQ page 1 or OPTION page 2
appears when the selected channel F or G control is adjusted, or the selected channel
[HIGH], [HI-MID], [LO-MID], or [LOW] button is pressed. See “Adjusting the EQ”
on page 63 for more information.
PANPOT AUTO SCREEN—When this option is turned on, PAN/ROUT page 1 or
OPTION page 2 appears when the selected channel PAN control is adjusted. See “Pan-
ning Input Channels” on page 47 for more information.
STORE CONFIRMATION—When this option is turned on, the Title Edit dialog box,
which also functions as a confirmation, appears whenever a mix scene or library pro-
gram is stored; useful for preventing mix scenes and library programs from being
stored accidentally.
RECALL CONFIRMATION—When this option is turned on, a confirmation dialog
box appears whenever a mix scene or library program is recalled; useful for preventing
mix scenes and library programs from being recalled accidentally.
DIGITAL IN SYNC CAUTION—When this option is turned on, a warning message
appears if digital signals from the Digital Stereo Coaxial In or Option I/O inputs are not
wordclock synchronized with the 01V. See “Setting the Wordclock” on page 209 for
more information.
“SELECTED CH” MESSAGE—When this option is turned on, a message indicating
the selected channel appears when the Fader mode is switched to and from Option I/O.
DELAY UNITS—Delay values for the input channel delay, stereo output delay, and
omni out delay can be specified in milliseconds, meters, or samples. See “Delaying
Channel Signals” on page 45, “Stereo Output Delay” on page 91, and “Omni Out
Delay” on page 117.
INC/DEC SCENE RECALL—When this option is turned on, the [–1/DEC] and
[+1/INC] buttons can be used to select and recall scene memories while MEMORY
page 1 is displayed. As the [–1/DEC] or [+1/INC] button is pressed, subsequent scene
memories that contain a mix scene are selected and recalled. See “Recalling Mix Scenes”
on page 187 for more information.