Filter
Top Products
140 Chapter 12—Effects
01V—Owner’s Manual
STEREO DELAY
Basic stereo delay.
MOD.DELAY
Basic repeat delay with modulation.
1. (Maximum value depends on
the tempo setting)
2. For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting
Delay, Freq, Note & Tempo Parameters” on page 137.
1. (Maximum value depends
on the tempo setting)
2.
3. For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting
Delay, Freq, Note & Tempo Parameters” on page 137.
Parameter Range Description
DELAY L 0.0–1350.0 ms Left channel delay time
NOTE L
*1
Used in conjunction with TEMPO to determine left
channel DELAY
FB.G L –99 to +99%
Left channel feedback (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
DELAY R 0.0–1350.0 ms Right channel delay time
NOTE R *1
Used in conjunction with TEMPO to determine right
channel DELAY
FB.G R –99 to +99%
Right channel feedback (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
HI.RATIO 0.1–1.0 High-frequency feedback ratio
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
TEMPO
*2
25–300 bps
Used in conjunction with NOTE L and NOTE R to
determine DELAY
Parameter Range Description
DELAY 0.0–2725.0 ms Delay time
DLY NOTE
*1
Used in conjunction with TEMPO to determine DELAY
FB.GAIN –99 to +99%
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
FREQ. 0.05–40.00 Hz Modulation speed
MOD
NOTE
*2
Used in conjunction with TEMPO to determine FREQ
DEPTH 0–100% Modulation depth
HI.RATIO 0.1–1.0 High-frequency feedback ratio
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
TEMPO
*3
25–300 bps
Used in conjunction with DLY NOTE and MOD NOTE
to determine DELAY and FREQ.