Filter
Top Products
232 Chapter 17—MIDI
01V—Owner’s Manual
Bulk Dump
01V scene memories, library programs, and setup data can be transferred to another
MIDI device using System Exclusive Bulk Dump. This can be used to back up impor-
tant 01V data to a MIDI data filer or controlling computer, or to exchange data between
01Vs.
The 01V can transmit MIDI System Exclusive Bulk Dump messages at anytime. In
order for the 01V to respond to Bulk Dump requests from other MIDI devices, the
BULK Rx switch on MIDI page 1 must be turned on. See “MIDI Setup” on page 224 for
more information.
1. Use the [MIDI] button to locate MIDI page 4, as shown below.
2. Use the cursor buttons to select a CATEGORY switch, and press the
[ENTER] button to select it.
The switch of the selected category appears highlighted.
3. For the SCENE MEM., LIBRARY, and REMOTE categories, use the cursor
buttons, PARAMETER wheel, and [–1/DEC] and [+1/INC] buttons to set
the TYPE, FROM, and TO parameters.
4. Use the cursor buttons to select the REQUEST or TRANSMIT switch, and
then press the [ENTER] button.
When REQUEST is used, the 01V transmits a MIDI Bulk Dump request message. The
receiving device then transmits the requested Bulk Dump data to the 01V. When
TRANSMIT is used, the 01V transmits the selected data category via Bulk Dump.
Data Type Type Range Description
ALL
— — All the following data
SETUP MEM.
——
01V setup data (all current set-
tings)
PGM. TABLE
——
MIDI page 2 settings (scene
memory to Program Change
assignment table)
CTL. TABLE
——
MIDI page 3 settings (parame-
ter to Control Change assign-
ment table)
SCENE MEM.
— EDIT, 1–99
Scene memories (EDIT is the
Edit Buffer)
LIBRARY
EQ 41–80 EQ library user programs
DYNA 41–80 Dynamics library user programs
EFF 43–99 Effects library user programs
REMOTE
INTP Banks 1–4 REMOTE page 1 banks
MMC ALL (locate points 1–6) REMOTE page 2 locate points
UDEF Banks 1–4 REMOTE page 3 banks