Filter
Top Products
Dynamics Library 173
01V—Owner’s Manual
Dynamics Library
Dynamics settings are stored as programs in the dynamics library, which contains 40
preset programs (1–40) and 40 user programs (41–80). User programs are used to store
custom dynamics settings, which can be titled for easy identification. The dynamics
library can also be used to transfer settings from one dynamics processor to another.
For example, the stereo out dynamics settings could be stored as a library program, and
then recalled to an aux send dynamics processor. The unique collection of preset
dynamics programs is designed for specific applications and instruments, and provides
a good reference and starting point when using the dynamics processors. See page 177
for a complete list of the preset dynamics programs.
The dynamics library is controlled from the library page shown below. Use the
[DYNAMICS] button to locate it.
The top half of the library page contains the STORE, RECALL, and TITLE EDIT
switches. Below these is the library window, which can be scrolled using the PARAME-
TER wheel. The “R” icon next to a preset program means read only. As each program
is selected, its dynamics curve is displayed. The GR meter indicates the amount of gain
reduction being applied to the selected channel. Next to this are level meters for the
selected channel and its neighbor.