Filter
Top Products
About the Edit Buffer & Indicator 185
01V—Owner’s Manual
About the Edit Buffer & Indicator
The Edit Buffer is the scene memory area inside the 01V that contains the current mix
settings. When a mix scene is stored, the mix settings in the Edit Buffer are written to
the selected scene memory. When a mix scene is recalled, the contents of the selected
scene memory are placed in the Edit Buffer, making them the current mix settings.
When a parameter is adjusted after a mix scene has been recalled, the EDIT indicator
appears in the Memory area of the display, indicating that the current mix settings (i.e.,
those in the Edit Buffer) no longer match those of the mix scene that was recalled last.
The Edit Buffer settings are stored when the 01V is turned off, so they don’t have to be
stored to a scene memory before the 01V is turned off.
Scene Memory 00
Scene memory 00 is a little different to scene memories 1 through 99 in that it’s a
read-only memory and contains the initial 01V settings. You can recall it, but you can-
not store it. To reset all mix settings to their initial values, recall scene memory 00.
Scene Memory Display Area
The scene memory area of the display shows the number and title of the
selected scene memory, whether that scene memory is read only or write
protected (indicated by the closed padlock icon), and whether or not the
contents of the Edit Buffer have been edited. Scene memories from 1 to
99 can be protected individually against accidental overwriting. Scene
memory 00 is a read only memory. When a scene memory other than the
one recalled last is selected, the scene memory number flashes. If the
scene memory that was recalled last is selected again, or a different scene
memory is recalled, the number stops flashing. Also in the Memory area
are the MIDI and HOST indicators, which appear when MIDI data is
received at the MIDI IN or TO HOST port, respectively. See “MIDI
Receive Indicators” on page 224 for more information.
Scene memory 02 has just been
recalled, so the contents of the Edit
Buffer match those of scene memory
02.
The EDIT indicator means that a
parameter has been changed since
scene memory 02 was recalled, so the
contents of the Edit Buffer no longer
match those of scene memory 02.